|
|
Order Information |
Item Number: 2005 Smarty S-06 POD
Price:
|
$739.00 Reg.
|
SALE
|
$685.00
|
Quantity:
|
|
|
|
2005 5.9L MADS Electronics Smarty Dodge Cummins Diesel Tuner / Power Chip / Downloader / Programmer / Smarty-S06 POD / Smarty S06 POD
$739.00 Reg.
$685.00 SALE
|
2005 5.9L Dodge Cummins Diesel
260 HP / UP TO 3 MPG
Smarty S-06 POD /
Smarty-S06 POD
FREE ! - NEXT DAY AIR !
30 Day Customer Satisfaction
NO FOOTPRINT
Smarty S-06 POD /
Smarty-S06 POD
* DTC ( Diagnostic Trouble Codes ) reader in
plain text
interpretation
* ABS programming for tire height adjustment.
* Upgrades through built in USB connector
* Automatic recovery of the ECM in case of an
interrupted update.
* 3.5 - 6 minutes required to update ECM depending
on truck
model
* Programmable speed limiter
* Power on Demand
Fast guide to Smarty’s special
Features
*CaTCHER software's inside
*Ten different performance levels.
*Fastest download in the industry, up to
three times faster than
competition, a typical ECM update takes about 3.5
to 5
depending on the truck model.
*ABS tire height updates in just few seconds.
*Not traceable in the stock setting. Smarty leaves
no footprint.
*Manual High Idle is enabled in all softwares
With the Truck in park, activate cruise
control. When dash light
illuninates hit set, this will activate
high-idle. Use accell button on
steering wheel to set the rpm's in increments to
the level you desire.
To turn the feature off, simply hit cancel on the
cruise control or
tap the brake pedal.
*Reads Diagnostic Trouble Codes in plain text.
*No tools required, no fuses to pull.
*USB built in for simple updates .
*Most complete keyboard in the industry.
*Reliable, it works off your OEM hardware.
*Programmable Speed Limiter from 25 to 250 mph
*Power on
Demand
Fast guide to Smarty's software levels
The horsepower settings. except #0, all other softwares
have a modified "Torque management"
( TQM ). The throttle response is greatly improved
but is set to a safe limit. With "Safe" Smarty
means safe for your tranny and rest of the
driveline.
SW # 0 : Half power
SW # 1 : 30 Hp increase, with added timing .
SW # 2 : 60 Hp increase, no added timing.
SW # 3 : 60 Hp increase, with added timing.
SW # 4 : 90 Hp increase, no added timing.
SW # 5 : 90 Hp increase, with added timing.
SW # 6 : 160 Hp increase, no added timing.
SW # 7 : 160 Hp increase, with added timing.
SW # 8 : 210 Hp increase, no added timing.
SW # 9 : 210 Hp increase, with added timing.
NOTE:
UP
TO 260 HP AVAILABLE !
260 HP / TNT - R Software Instructions / Click here
Tested on stock trucks on a Mustang Dyno
Stock means just that. Stock! Even the air filters
were stock...
The trucks were S T O C K, even the wastegate settings!
Smarty checked the "baseline" ( the stock truck Hp
at the rear
wheels ) twice in a day in order to be sure about
Smartys findings.
The above delared HP numbers are all rounded down
to the
closest number. For example the 90 Hp file actually
did 96 Hp.
That's a 90 Hp software for Smarty, not a 100. The
170 Hp was 174.
Power on Demand
100 power levels selectable in just one second
during the driving! It's easy:
just type the preferred power level directly on
Smarty keyboard, from 00 to 99.
That's all! For security reason, the truck waits
that the throttle is released
before applying the new power level.
No trace is left in the ECM!
SmartyCR is the FIRST AND ONLY downloader that
does not erase any of
the stored data in the ECM. Smarty does NOT leave
any electronic footprints
in the ECM or any other electronic module in the
truck. Smarty does NOT
set ANY codes once the ECM is set back to stock.
Smarty does NOT need
to have fuses pulled.
No matter what the competition claims , in one way or
another they're ALL detectable.
Smarty is NOT!
Yet, Smarty can not do one thing for you. Fix what others
have broken. Smarty can not
restore a key on counter that another downloader
has erased . Smarty can not fix VIN#
troubles caused by other products. If your Check
engine / ABS light is on because another
product has screwed your ECM, Smarty can not fix
it, the other guy HAS to...
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in
increments of 10 tenth of an inch
in just a couple seconds. Of course, Smarty needs
to be VIN# locked to the
truck in order to get into the ABS adjustment
section.
DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed
also in plain English.
That's old news by now. Smarty S-03 was the first
one to provide that
utility, others found the idea to be a good one
too. ( Smarty does erase
ABS codes too but does not display them )
ECM update speed
Faster than anything else on the market! Again
Smarty has done its homework
on the protocol. Less than 5 minutes. Three times
faster than a Star-Scan
diagnostic tool or competitor.
Smarty has developed its own bootloader in order to not
have to
pull fuses should an update become interrupted for
any reason.
All you have to do is to turn the key off / key on
Smarty does
everything else on it's own.
Updates
CaTCHER softwares as they are today are only a
Starting Point.
Smarty S-06 POD back side quick info
|
|
|
100 % Secure Ordering / 128 Bit Encryption / SSL Security / VeriSign
Secured !
|
|
|
All Prices in US Dollars
|